CE-110538-8
Blu-ray Disc Read Error
CE-110538-8 is a Blu-ray read error, meaning the PS5 could not read the disc in the drive. As with most disc errors, the cause is usually the disc rather than the console, scratches, dust, or an unsupported disc type, though a hardware fault in the drive is possible. Inspect both sides, clean from the center outward with a lint-free cloth, and test a different disc to isolate the problem. If every disc fails to read consistently, the drive itself likely needs service.
What causes this error
- Disc surface is scratched or dirty
- Disc type not supported
- Disc drive hardware fault
How to fix CE-110538-8
- 1
Eject the disc and inspect both sides for scratches or dust.
- 2
Clean the disc with a lint-free microfiber cloth, wiping from the center outward - never in a circular motion.
- 3
Try a different Blu-ray disc to determine if the drive or the specific disc is the problem.
- 4
Restart the console and reinsert the disc.
- 5
If all discs fail to read consistently, the drive hardware may be faulty - contact PlayStation Support for a repair or replacement.
FAQ
What causes PS5 error CE-110538-8?
Disc surface is scratched or dirty Disc type not supported Disc drive hardware fault
How do I fix PS5 error CE-110538-8?
Eject the disc and inspect both sides for scratches or dust. Clean the disc with a lint-free microfiber cloth, wiping from the center outward - never in a circular motion. Try a different Blu-ray disc to determine if the drive or the specific disc is the problem. Restart the console and reinsert the disc. If all discs fail to read consistently, the drive hardware may be faulty - contact PlayStation Support for a repair or replacement.
Do I need to reset my PS5 to fix this error?
A full factory reset is rarely needed. Start with the basic steps: restart the console, check for updates, and rebuild the database in Safe Mode. Only contact PlayStation Support or consider a reset if all other steps fail.